@inbook {1447,
	title = {Surface science studies of the effect of Al alloy microstructure on the formation of chromate coatings},
	booktitle = {Aluminium Alloys 2006, Pts 1 and 2 - Research through Innovation and Technology},
	series = {Materials Science Forum},
	volume = {519-521},
	year = {2006},
	note = {ISI Document Delivery No.: BEZ41Times Cited: 3Cited Reference Count: 22Kulinich, S. A. Akhtar, A. S. Susac, D. Wong, K. C. Wong, P. C. Mitchell, K. A. R.Proceedings Paper10th International Conference on Aliminium Alloys (ICAA-10)JUL 09-13, 2006Vancouver, CANADABRANDRAIN 6, CH-8707 ZURICH-UETIKON, SWITZERLAND},
	pages = {621-628},
	publisher = {Trans Tech Publications Ltd},
	organization = {Trans Tech Publications Ltd},
	address = {Zurich-Uetikon},
	abstract = {Surface science methods including scanning Auger microscopy (SAM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy have been used to study the initial growth of chromate conversion coatings on aluminum 2024-T3 alloy, using a coating bath formed by dissolving CrO3, Na2Cr2O7 and NaF in water. The objective is to learn more about growth mechanism on the different microstructural regions of this alloy surface, including the second-phase particles and the alloy matrix.},
	keywords = {2024-T3 ALUMINUM-ALLOY, AA2024-T3, aluminum alloy, ATOMIC-FORCE MICROSCOPY, CHEMISTRY, chromate conversion coating, CONVERSION COATINGS, corrosion, NUCLEATION, PAINT ADHESION, photoelectron, Raman spectroscopy, scanning Auger microscopy, scanning electron microscopy, SPECTROSCOPY},
	isbn = {0255-54760-87849-408-1},
	url = {<Go to ISI>://000240309000097},
	author = {Kulinich, S. A. and Akhtar, A. S. and Susac, D. and Wong, K. C. and Wong, P. C. and Mitchell, K. A. R.},
	editor = {Poole, W. J. and Wells, M. A. and Lloyd, D. J.}
}
@article {1000,
	title = {Microstructural effects on the initiation of zinc phosphate coatings on 2024-T3 aluminum alloy},
	journal = {Applied Surface Science},
	volume = {239},
	number = {1},
	year = {2004},
	note = {ISI Document Delivery No.: 871NRTimes Cited: 22Cited Reference Count: 67},
	month = {Dec},
	pages = {45-59},
	type = {Article},
	abstract = {The initiation of coatings deposited on to 2024-T3 aluminum alloy from supersaturated zinc phosphating solutions has been studied using scanning Auger microscopy (SAM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The alloy microstructure, especially associated with the second-phase particles, strongly affects the formation stages of the coating process, where etching of the substrate has a significant role. At the start, zinc phosphate (ZPO) crystals form on the Al-Cu-Mg second-phase particles, rather than on the matrix or on the Al-Cu-Fe-Mn particles, with the initial nucleation appearing at interfaces between Al-Cu-Mg particles and the matrix. In contrast, the formation of the ZPO coating is delayed on the cathodic Al-Cu-Fe-Mn particles, compared to those of the Al-Cu-Mg composition. When the coating process is completed, the whole sample surface is covered with ZPO although its thickness varies at the different micro-regions. (C) 2004 Elsevier B.V. All rights reserved.},
	keywords = {7075-T6, AA2024-T3, aluminum alloy, ATOMIC-FORCE MICROSCOPY, CONVERSION COATINGS, ELECTRON-MICROSCOPY, INTERGRANULAR CORROSION, LOCALIZED CORROSION, PERCENT CU ALLOY, phosphating, PITTING CORROSION, SAM, SEM, surface microstructure, TITANIUM PHOSPHATE, XPS},
	isbn = {0169-4332},
	url = {<Go to ISI>://000225140900007},
	author = {Susac, D. and Sun, X. and Li, R. Y. and Wong, K. C. and Wong, P. C. and Mitchell, K. A. R. and Champaneria, R.}
}
