@article {1326,
	title = {The effect of pH and role of Ni2+ in zinc phosphating of 2024-Al alloy. Part I: Macroscopic studies with XPS and SEM},
	journal = {Applied Surface Science},
	volume = {253},
	number = {2},
	year = {2006},
	note = {ISI Document Delivery No.: 114DVTimes Cited: 10Cited Reference Count: 30Akhtar, A. S. Wong, K. C. Mitchell, K. A. R.},
	month = {Nov},
	pages = {493-501},
	type = {Article},
	abstract = {Coatings formed on 2024-T3 aluminum alloy were studied by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) after dipping in zinc phosphating (ZPO) baths at different acidities, for different lengths of time, and with or without Ni2+ additive. The overall objective was to learn more about the role of Ni2+ on the ZPO coating mechanism, particularly since this additive is believed to improve corrosion protection for the Al alloy. Secondary phosphates dominate the coatings when the Ni-containing solution is adjusted to starting pH values of either 3 or 5, while tertiary phosphate is predominant at pH 4. AlF3 precipitates during the early stages of the coating process. Ni2+ has two main roles in the mechanism. First, the rate of increase in local solution pH is retarded by the slower kinetics of reactions involving Ni2+ compared to Zn2+,leading to thinner ZPO coatings when Ni2+ is present in the coating solution. Second, most Ni2+ deposition occurs during the later stages of the coating process, by nickel phosphate deposition and/or by formation of a Ni-rich oxide. (c) 2006 Elsevier B.V. All rights reserved.},
	keywords = {ALKALINE STABILITY, aluminum alloy, ALUMINUM-ALLOY, CATALYSTS, COATINGS, CONVERSION COATINGS, FILMS, Ni2+ additive, NICKEL, OXIDATION, photoelectron spectroscopy, scanning electron microscopy, SPECTROSCOPY, STEEL, zinc phosphate},
	isbn = {0169-4332},
	url = {<Go to ISI>://000242647800017},
	author = {Akhtar, A. S. and Wong, K. C. and Mitchell, K. A. R.}
}
@inbook {1324,
	title = {Surface science studies of the effect of Mn2+ on zinc phosphating of 2024-T3 Al alloy},
	booktitle = {Aluminium Alloys 2006, Pts 1 and 2 - Research through Innovation and Technology},
	series = {Materials Science Forum},
	volume = {519-521},
	year = {2006},
	note = {ISI Document Delivery No.: BEZ41Times Cited: 1Cited Reference Count: 10Akhtar, A. S. Susac, D. Wong, K. C. Wong, P. C. Mitchell, K. A. R.Proceedings Paper10th International Conference on Aliminium Alloys (ICAA-10)JUL 09-13, 2006Vancouver, CANADABRANDRAIN 6, CH-8707 ZURICH-UETIKON, SWITZERLAND},
	pages = {753-758},
	publisher = {Trans Tech Publications Ltd},
	organization = {Trans Tech Publications Ltd},
	address = {Zurich-Uetikon},
	abstract = {The present work is part of a broader investigation of the effects of additives in zinc phosphate (ZPO) coating solutions that are designed for specific applications to Al and its alloys. ZPO conversion coatings improve the corrosion resistance of the Al substrate and increase the adhesion of paint. Coatings formed on 2024-T3 aluminum alloy, after dipping in ZPO coating baths containing Mn2+, have been studied by X-ray photoelectron spectroscopy (XPS), SEM, and scanning Auger microscopy (SAM). Variations are observed in coating morphology and composition as the amount of Mn2+ in the coating solution increases through the 0 to 2500 ppm range. Adhesion tests give information on the relative strength of the coating-substrate interaction at different microstructural areas.},
	keywords = {aluminum alloy, ALUMINUM-ALLOY, Auger, COATINGS, CONVERSION COATINGS, electron spectroscopy, Mn2+ additive, photoelectron spectroscopy, scanning electron microscopy, STEEL, zinc phosphate},
	isbn = {0255-54760-87849-408-1},
	url = {<Go to ISI>://000240309000118},
	author = {Akhtar, A. S. and Susac, D. and Wong, K. C. and Wong, P. C. and Mitchell, K. A. R.},
	editor = {Poole, W. J. and Wells, M. A. and Lloyd, D. J.}
}
@article {793,
	title = {The effect of Ni2+ on zinc phosphating of 2024-T3 Al alloy},
	journal = {Surface \& Coatings Technology},
	volume = {187},
	number = {2-3},
	year = {2004},
	note = {ISI Document Delivery No.: 860VHTimes Cited: 27Cited Reference Count: 32},
	month = {Oct},
	pages = {208-215},
	type = {Article},
	abstract = {Zinc phosphate (ZPO) conversion coatings formed on 2024-T3 aluminum alloy, and on high-purity aluminum, after dipping in coating baths containing different amounts of Ni2+, have been studied by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, scanning Auger microscopy (SAM) and electrochemical measurements. Significant variations are observed in coating morphology and in stability against corrosion for the 2024-Al alloy as the amount of Ni2+ in the coating solution increases through the 0-2000 ppm range. By contrast, for high-purity Al, the most marked changes in coating morphology occur only as the Ni2+ concentration reaches 2000 ppm. The presence of additional elements, and especially Cu, in the 2024-Al samples results in an increase in the number of cathodic sites and hence more coating is formed for corresponding conditions. Additionally, the existence of second-phase particles in the 2024-Al sample leads to variations in the coatings at the microstructural level across the surface. These differences include local variations in the amount of Ni2+ in the coatings, as well as the local coverage. (C) 2004 Elsevier B.V. All rights reserved.},
	keywords = {aluminum alloy, ALUMINUM-ALLOY, Auger electron spectroscopy, chemical conversion, CHROMATE CONVERSION COATINGS, CORROSION PROTECTION, FILMS, Ni2+ additive, NICKEL, phosphating, photoelectron spectroscopy, STEEL, SURFACE, XPS},
	isbn = {0257-8972},
	url = {<Go to ISI>://000224371300011},
	author = {Akhtar, A. S. and Susac, D. and Glaze, P. and Wong, K. C. and Wong, P. C. and Mitchell, K. A. R.}
}
@article {3954,
	title = {A characterization of the gamma-glycidoxypropyltrimethoxysilane and aluminium interface by SIMS and XPS},
	journal = {Journal of Materials Science Letters},
	volume = {16},
	number = {20},
	year = {1997},
	note = {ISI Document Delivery No.: YD607Times Cited: 21Cited Reference Count: 14},
	month = {Oct},
	pages = {1675-1676},
	type = {Article},
	keywords = {COUPLING AGENTS, FILMS, ION MASS-SPECTROMETRY, METAL, OXIDE, POLYMER SURFACES, SILANES, STEEL},
	isbn = {0261-8028},
	url = {<Go to ISI>://A1997YD60700017},
	author = {Fang, J. and Flinn, B. J. and Leung, Y. L. and Wong, P. C. and Mitchell, K. A. R. and Foster, T.}
}
