@article { ISI:000314172200019,
	title = {Technical Note: New methodology for measuring viscosities in small volumes characteristic of environmental chamber particle samples},
	journal = {ATMOSPHERIC CHEMISTRY AND PHYSICS},
	volume = {13},
	number = {2},
	year = {2013},
	pages = {791-802},
	abstract = {Herein, a method for the determination of viscosities of small sample volumes is introduced, with important implications for the viscosity determination of particle samples from environmental chambers (used to simulate atmospheric conditions). The amount of sample needed is < 1 mu l, and the technique is capable of determining viscosities (eta) ranging between 10(-3) and 10(3) Pascal seconds (Pa s) in samples that cover a range of chemical properties and with real-time relative humidity and temperature control; hence, the technique should be well-suited for determining the viscosities, under atmospherically relevant conditions, of particles collected from environmental chambers. In this technique, supermicron particles are first deposited on an inert hydrophobic substrate. Then, insoluble beads (similar to 1 mu m in diameter) are embedded in the particles. Next, a flow of gas is introduced over the particles, which generates a shear stress on the particle surfaces. The sample responds to this shear stress by generating internal circulations, which are quantified with an optical microscope by monitoring the movement of the beads. The rate of internal circulation is shown to be a function of particle viscosity but independent of the particle material for a wide range of organic and organic-water samples. A calibration curve is constructed from the experimental data that relates the rate of internal circulation to particle viscosity, and this calibration curve is successfully used to predict viscosities in multicomponent organic mixtures.},
	issn = {1680-7316},
	doi = {10.5194/acp-13-791-2013},
	author = {Renbaum-Wolff, L. and Grayson, J. W. and Bertram, A. K.}
}
